paysagement research
Hardscape and site work: construction practice for Quebec (freeze/thaw lens)
paysagement (research)
- Consulted
- October 10, 2026
- Region
- QC
- Key
- research.construction-hardscape
Engine parameters taken from this source
52
- Allowance, aggregate lossallowance.aggregate_loss · QC
- Allowance, bedding screedallowance.bedding_screed · QC
- Allowance, clear stoneallowance.clear_stone · QC
- Allowance, edge restraintallowance.edge_restraint · QC
- Allowance, geotextile overlapallowance.geotextile_overlap · QC
- Allowance, mulchallowance.mulch · QC
- Allowance, polymeric sand spillallowance.poly_spill · QC
- Allowance, sod cutallowance.sod_cut · QC
- Allowance, topsoil settlementallowance.topsoil_settlement · QC
- Bed, depth, perennials (m)bed.depth.perennial_m · QC
- Bed, depth, shrubs (m)bed.depth.shrub_m · QC
- Catch basin, grate below grade (mm)catch_basin.grate_below_grade_mm · QC
- Catch basin, pipe trench, bedding (m)catch_basin.pipe_trench.bedding_m · QC
- Catch basin, pipe trench, depth (m)catch_basin.pipe_trench.depth_m · QC
- Catch basin, pipe trench, width (m)catch_basin.pipe_trench.width_m · QC
- Density, bank soil, claydensity.soil_bank.clay · QC
- Density, bank soil, siltdensity.soil_bank.silt · QC
- Drain, French, bed (m)drain.french.bed_m · QC
- Drain, French, cover (m)drain.french.cover_m · QC
- Drain, French, extra trench width (m)drain.french.trench_extra_w_m · QC
- Dry well, porositydrywell.porosity · QC
- Dry well, foundation setback (m)drywell.setback_foundation_m · QC
- Edge, spike spacing (m)edge.spike_spacing_m · QC
- Edge, spikes per corneredge.spikes_per_corner · QC
- Excavator, bank output, 8 texcavator.q_bank.ex_8t · QC
- Excavator, bank output, micro 0.8 texcavator.q_bank.micro_0_8t · QC
- Excavator, bank output, midi 5.5 texcavator.q_bank.midi_5_5t · QC
- Excavator, bank output, mini 1.7 texcavator.q_bank.mini_1_7t · QC
- Excavator, bank output, mini 3.5 texcavator.q_bank.mini_3_5t · QC
- Geogrid, overlap allowancegeogrid.overlap_allowance · QC
- Lift, maximum, light plate (m)lift.max.plate_light_m · QC
- Lift, maximum, heavy reversible plate (m)lift.max.plate_reversible_heavy_m · QC
- Lift, maximum, medium reversible plate (m)lift.max.plate_reversible_med_m · QC
- Modifier, pattern, herringbonemod.pattern.herringbone · QC
- Mulch, depth (m)mulch.depth_m · QC
- Production, plate, m2 per hour per liftproduction.plate.per_lift_m2_h · QC
- Skid steer, haul (m3 loose per h)skid_steer.haul_m3_loose_per_h · QC
- Retaining wall, cap allowancesrw.cap_allowance · QC
- Retaining wall, cap allowance, curved extrasrw.cap_allowance.curved_extra · QC
- Retaining wall, curved extrasrw.curved_extra · QC
- Retaining wall, drain pipe diameter (mm)srw.drain_pipe_dia_mm · QC
- Retaining wall, gravity limit, Rinox analog, inclined (m)srw.gravity_limit.rinox_analog.inclined_m · QC
- Retaining wall, gravity limit, Rinox analog, vertical (m)srw.gravity_limit.rinox_analog.vertical_m · QC
- Retaining wall, unit waste, curved extrasrw.unit_waste.curved_extra · QC
- Retaining wall, unit waste, straightsrw.unit_waste.straight · QC
- Steps, tread overhang (m)steps.tread_overhang_m · QC
- Table, swell class by soiltable.soil_to_swell_class · QC
- Table, waste coefficient by patterntable.waste_k_pattern · QC
- Waste, breakage, concretewaste.breakage.concrete · QC
- Waste, breakage, large formatwaste.breakage.large_format · QC
- Waste, upper clampwaste.clamp_max · QC
- Waste, lower clampwaste.clamp_min · QC
Production rates
- rate.base_per_lift · QC
- rate.drain.backfill · QC
- rate.drain.catch_basin · QC
- rate.drain.downspout · QC
- rate.drain.pipe · QC
- rate.drain.stone_place · QC
- rate.edge.plastic · QC
- rate.joint_compact · QC
- rate.pavers.cut · QC
- rate.pavers.lay · QC
- rate.screed · QC
- rate.sod_lay · QC
- rate.srw.caps · QC
- rate.srw.trench_pad · QC
- rate.srw.units · QC
- rate.strip_sod_hand · QC
- rate.strip_sod_machine · QC
- rate.subgrade_proof · QC